Call By Call - Siemens Gigaset 3070/75 ISDN User Manual

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
System functions
Setting units
Step
Press
1.
by
Step
Select using [ ] and [OK]:
2.
Cost/duration
Enter the PIN and confirm with [OK].
3.
4. Select using [ ] and [OK]:
Select using [ ] and [OK]:
5.
If the calculation type "Price per unit:" was active when the units were set, a
prompt is displayed.
Confirm the prompt for accounting method with [YES].
6.
All accounts are reset and the option is highlighted.
Displaying a cost overview
Depending on the setting, call or charge units are displayed for each internal
subscriber, for each configured MSN, and for the system as a whole.
Press
1.
Select using [ ] and [OK]:
2.
Cost/duration
Enter the PIN and confirm with [OK].
3.
4. Select using [ ] and [OK]:
The accounts for each internal subscriber and for each configured MSN are dis-
played. The total amount is shown at the start and at the end of the list.
Deleting the cost overview total
You are in the cost overview display:
1. Select using [ ] and [
Select using [ ] and [OK]:
2.
Info Totalled and individual costs must be deleted separately. This means that if you
delete an MSN total for example, the individual charges incurred remain stored
in the handset and must be deleted individually.

Call by Call

With this procedure you can switch to other providers for individual calls, thus
keeping call costs to a minimum. This simple procedure is explained in more
detail in the operating instructions for Gigaset 3000 Comfort.
42
for selection menus.
Service Set up
.
Access type
Units/Costs
for selection menus.
Service Set up
.
Cost overview
]: (required cost overview) .
Delete amount
giga3070KAP .fm
Settings System settings
.
.
Settings System settings
.
.
09.01.01