Ring Delay; Conducting Calls With More Than One Subscriber - Siemens Gigaset 3070/75 ISDN User Manual

Gigaset 3070/3075isdn, GB, A31008-G3070-B100-3-7619
Making comfort calls

Ring delay

Step
by
Using the ring delay feature you can configure a handset for each individual
Step
MSN to delay the response to the call signal. However, during this ring delay
time the handset can accept the call using the "
signal queuing. When this feature is being configured, the time allowed by the
answering machine for recording a message (default: Automatic 2/4) must be
taken into account. When the ring delay that has been set is higher than the
setting on the active answering machine, there is no call signal as the answer-
ing machine accepts the call beforehand.
Setting ring delay
1. Press
Select using [ ] and [OK]:
2.
Set up device
3. Select using [ ] and [
Select using [ ] and [OK]:
4.
Select using [ ] and [
5.
Set No. of Rings
6.
Picking up calls during ring delay
A call is coming through to the assigned MSN.
1.
2. Press the
<Name>
Press the softkey
3.
or 3. Press the softkey

Conducting calls with more than one subscriber

Internal enquiry call
You would like to call an internal subscriber during an external call.
Press [INT] and enter the call number for the second subscriber.
1.
A connection is established with the internal subscriber.
or Press the softkeys: [INT]
1.
Select using [ ] and [OK]: (required internal subscriber) .
2.
A connection is established with the internal subscriber.
If the internal subscriber dialled is busy:
Press [BACK]: You are reconnected with the external caller.
3.
The internal subscriber answers the call:
or Toggling: you can switch between call parties with [ ] and [ ].
3.
or Three-way calling: press [CONF .]. A conference circuit is established.
3.
28
for the selection menu.
Service Set up
.
]: (required internal subscriber) .
Ring delay
]: (required MSN) .
using [ - ],
key, the following appears in the display:
YES . You can then answer the call.
NO
. You can set up your own external or internal call.
[LIST].
giga3070KAP .fm
Accept? " function without a call
Settings Set up user
.
= off.
Accept? <Number>
09.01.01
for