Siemens OpenStage 60 SIP User Manual page 101

Step by Step
User
Configuration
Incoming calls
Deflect
Allow deflection
Yes
Default destination
Deflect to DSS Yes
Permitting call deflection
z You can also configure this setting via the Web interface
page 271.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Select and confirm the option shown.
j
Enter and confirm the phone number to which the sta-
tion should be deflected.
Entering a destination phone number is not man-
datory when call deflection is active. If you want
to deflect a call, you are prompted to enter a des-
tination phone number if there is none stored.
or Deflecting to a DSS number
A call can be deflected to a direct station selection
(DSS) subscriber using the DSS key, if the key is config-
ured and the deflect function is activated by your admin-
istrator
Information only, as set by administrator: Yes or No.
page 137.
Enhanced phone functions
101