Testing The "Konftel 60W" Bluetooth Conference Phone - Siemens OpenStage 60 SIP User Manual

Step by Step
Konftel 60W
Set as conference phone
Konftel 60W
Connect
Accept
The message "Pairing in progress" is displayed. Follow-
ing successful pairing, the device is added to the list of
paired devices. You hear a short confirmation tone from
the Konftel 60W before the device switches itself off
again.
Connecting Konftel 60W with OpenStage
The Konftel 60W must now be connected to the
OpenStage 60/80.
Select the Konftel 60W on the list.
Select and confirm the option shown in the context
menu.
Select the Konftel 60W on the list again.
Select and confirm the option shown in the context
menu. The connection is immediately established and
the Konftel 60W is ready for use.
Testing the "Konftel 60W" Bluetooth
conference phone
Answering a call
Prerequisite: The "Konftel 60W" conference phone is
ready for use but turned off (see user guide
"Konftel 60W"). The OpenStage is in idle mode.
Both the phone and the "Konftel 60W" ring. The caller is
displayed. To answer the call, you can now:
n
Press the key shown.
or
Select and confirm the option shown.
or
Press the On/Off key on the "Konftel 60W".
You are connected with the other party. The
"Konftel 60W" is activated. You can now for example ini-
tiate a consultation call or accept a second call to set up
a conference.
Bluetooth
251