Lines With Hot Or Warm Line Function - Siemens OpenStage 60 SIP User Manual

Step by Step
User
Configuration
Keyset
Lines
Line
Hot warm dest

Lines with hot or warm line function

Your administrator can configure a hot or warm line for
the primary and secondary line.
The function is activated when on
• the primary line
you lift the handset on the phone and press the line
or loudspeaker key
• the secondary line
you press the line key.
A number specified by you is dialed with a hot line im-
mediately and with a warm line after a specific time.
Examples:
• The phone in the lift immediately dials the reception
number.
• The phone at a patient's bed dials the ward number
e.g. after a minute if no other number is dialed.
Entering a number for the hot and warm line func-
tion
Specify which number should be dialed when the hot or
warm line function is activated.
z You can also configure this setting via the web interface
page 271.
v
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the required line in the context
menu.
Select and confirm the option shown.
Making calls with multiple lines
133