Key Click - Siemens OpenStage 60 SIP User Manual

Step by Step
User
Phone

Key click

Volume
Medium
Keys
Keypad only
All keys
Save & exit
Key click
You can configure whether a key click should be audible
when a key is pressed. You can also decide whether
this should apply for all keys or only for the keys on the
keypad. In addition, you can adjust the click volume or
disable the sound.
z You can also configure this setting via the Web interface
page 271.
v
Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
j
if nec.
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Adjusting the volume for the Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume
level. You can also select one of the following three
options:
• Low
• High
• Off (for no click)
Key selection
Select and confirm the option shown.
Select and confirm if the setting is only to apply for the
character input keys.
or
Select and confirm the option shown for all keys.
Select and confirm the option shown.
Individual phone configuration
225