Control Panel; Led Indicators - Schumacher SP1 Owner's Manual

10. ASSEMBLY iNSTRUCTiONS
Remove all cord wraps and uncoil the cables prior to using the battery
charger.
11.

CONTROL PANEL

LEd indicators

AC POWER
supplied to the battery charger.
CHARGiNG
a battery and is charging it.
CHARGiNG
abort mode.
CHARGEd
and the charger is in maintain mode.
CHARGEd
charged.
NOTE: See the Operating Instructions section for a complete
description of the charger modes.
12. OPERATiNG iNSTRUCTiONS
accordance with the assembly instructions before it is used.
Charging
1. Ensure that all of the charger components are in place and in
good working condition, for example, the plastic boots on the
battery clips.
2. Connect the battery following the precautions listed in sections
6 and 7.
3.
Connect the AC power following the precautions listed in section
8. Make sure to place the charger on a dry, non-flammable
surface like metal or concrete.
4. To disconnect, reverse the procedure.
(red) LEd lit: Indicates that there is AC power
(yellow) LEd lit: Indicates the charger has detected
(yellow) LED flashing: Indicates the charger is in
(green) LEd lit: Indicates the battery is fully charged
(green) LED flashing: Indicates the battery is 80%
This battery charger must be properly assembled in
•9•