Ruggedape™ (Appplication Processing Engine); Power Supply - RuggedCom RX1512 Installation Manual

Rugged layer 3 switch and router

Hide thumbs Also See for RX1512:

Table of Contents

RUGGEDCOM RX1512

Installation Guide

Section 2.3.8

RuggedAPE™ (Appplication Processing Engine)

Figure 27: RuggedAPE™ Module

NOTE

For more information about the RuggedAPE module, including installation and setup instructions, refer

to the APE Installation and User Guide.

Section 2.4

The RX1512 power supply is integrated with the Control Module. The power supply and fail-safe relay

connections are made on a pluggable terminal block located on the front panel of the Control Module. The

RX1512 power supply input is 11VDC to 72VDC, and consumes a maximum of 25W.

Figure 28: Pluggable terminal block power module and fail-safe relay connections

RuggedAPE™ (Appplication Processing Engine)

Chapter 2

RUGGEDCOM Modules

Table of Contents