Advertisement
Assembly
Footrest with
Soothing Unit
2
• Position the footrest so that the
soothing unit is upright.
• While flexing the base wires toward
each other, hook the footrest onto the
ends of the base wires.
• Push the footrest down completely to
the tabs on the base wires.
• Make sure the colored tabs on the left and right base wires are visible
through the base tube holes (see inset). If the colored tabs are not
visible through the base tube holes, you have assembled the base
incorrectly. Disassemble all parts and refer back to Assembly Step 1.
Flex Base
Wires Inward
Tab
Base Tube
Colored Tab
6
Tab
Base Wire
Back View
Advertisement
