Advertisement
Set-up & Use
Anchored End
2
Free End
Tighten
To tighten the restraint:
• Feed the anchored end of the belt up through the buckle to
form a loop
.
• Pull the free end of the belt
• Repeat this procedure to tighten the other belt.
To loosen the restraint:
• Feed the free end of the belt up through the buckle to form a
loop
. Enlarge the loop by pulling on the end of the loop
toward the buckle.
• Pull the anchored end of the belt to shorten the free end of
the belt
.
• Repeat this procedure to loosen the other belt.
Please Note: After adjusting the belts to fit your child, make sure
you pull on the restraint to be sure it is securely fastened.
3
Calming Vibrations
• Make sure your child is properly secured in the seat.
• To turn vibrations on, slide the power switch on the soothing unit
to the on position
• To turn vibrations off, slide the power switch on the soothing unit
to the off position
IMPORTANT! If vibrations from the soothing unit become faint, or if
there are no vibrations, remove the battery from the soothing unit
and dispose of it properly. Replace the battery with a new "D" (LR20)
alkaline battery.
Buckle
.
•
.
°
.
12
Anchored End
Free End
Loosen
Buckle
Advertisement
