Settings For The Entire Td (System) - Roland TD-11 Owner's Manual

Settings for the Entire TD (SYSTEM)
Parameters that apply to the entire TD, such as the metronome settings and the pad sensitivity, are called "system parameters. "
Here we'll explain the procedure for setting the system parameters, and what each parameter does.
Basic procedure
1.
In the DRUM KIT screen (p . 11), press the [MENU] button .
The KIT MENU screen will appear.
2.
Press the ( ) cursor button to scroll the screen until the SYSTEM icon appears .
3.
Press the [F3] (SYSTEM) button .
The SYSTEM screen will appear.
4.
Use the cursor buttons ( / ) to select the desired menu of settings .
The following menus are available.
Menu Description
Settings for display contrast and power
Options
(Auto Off )
Metronome Metronome settings
Allows you to set the function of the
pad connected to the TRIGGER IN AUX
Pad Control
jack.
MIDI
MIDI-related settings
USB Memory Using a USB flash drive
Refer to the separate document "About
Wireless
the Wireless LAN Function. "
Pad Settings
Pad settings
Information View information about the TD itself
Factory Reset Reset the TD to its factory settings
5.
Press the [F3] (ENTER) button .
The corresponding settings screen will appear.
6.
Use the cursor buttons ( / ) to select a parameter, and use the value dial to change the value of the
parameter .
7.
Press the [EXIT] button several times to return to the DRUM KIT screen .
34
Page
p. 35
p. 36
p. 36
p. 37
p. 38
—
p. 41
p. 46
p. 46