5-3. Adjusting the pressure of the presser foot
Decrease
1
2
5-4. Micro-lifter
1
2
Increase
– 3 –
Loosen nut 2 by turnng counterclockwse, and turn
presser sprng regulator 1 to adjust the pressure.
Turn the regulator clockwse to ncrease the pres-
sure and turn t counterclockwse to decrease the
pressure.
After the adjustment, tghten nut 2 .
Loosen screw 1 , turn mcro-lfter pn 2 , and the
heght of the presser foot can be adjusted to 0 to 0.5
mm.