The Position Of Thread Guide Bar; Attaching The Spool Holder Cap And Net - Janome 1110DX Instruction Book

1
1
1
2
2
3
4
2
2
1
16

The Position of Thread Guide Bar

Pull the thread guide bar up as far as it will go.
1 Thread guide bar
2 Thread guide

Attaching the Spool Holder Cap and Net

1. When you use a small thread spool, pull out the
spool holder from the spool pin. Then place the spool
with its slit side up, and put the spool holder cap on top
of it.
1 Spool holder
2 Spool pin
3 Spool holder cap
4 Slit
2. If the thread slips down from the spool during
threading and/or sewing, put a net on the spool as
illustrated to prevent jamming.
1 Net
2 Spool pin