Janome Horizon Instruction Book page 33

z
x
c
v
b
n
q w
t
e r
Touch panel calibration
If the touch panel keys seem out of alignment, calibrate
the key position as follows.
z Press the center of the stitch width adjusting key with
the touch panel stylus.
x Press the center of the stitch length adjusting key with
the touch panel stylus.
c Press the center of the edit key with the touch panel
stylus.
v Press the "+" sign that appears on the LCD screen
with the touch panel stylus.
b Press the center of the D4/D4S key with the touch
panel stylus.
n Press the " " sign that appears on the LCD screen
with the touch panel stylus.
The new settings are registered.
When turning the power on, the opening window shows
the customized settings that you have made.
q Buzzer sound
w Sub window display time
e Resumption setting
( mark appears when the setting is on.)
r Start up speed setting
t Language selection
31