Table of Contents
Advertisement
q Stitch width adjusting key (refer to pages 34, 46, 58)
Press this key to alter the stitch width or needle drop
position.
w Stitch length adjusting key (refer to pages 34, 46, 58)
Press this key to alter the stitch length.
e Edit key (refer to pages 24, 58, 94)
Press this key to edit the programmed pattern
combinations.
r Startover key (refer to page 88)
Press this key to sew a pattern combination from the
beginning.
t Twin needle key (refer to page 81-82)
Press this key when sewing with a twin needle.
y Elongation key (refer to page 80)
Press this key to elongate satin stitch patterns.
u Mirror image key (refer to pages 86-87)
Press this key to sew a mirror image of the selected
pattern.
i Memory key (refer to pages 36, 69)
Press this key to register programmed pattern
combinations.
Up to 50 program can be memorized.
This key is also used to customize the default settings of
stitch length and width.
o Mode key (refer to page 24)
Press this key to open the group selection window.
!0 Monogram key (refer to pages 91-92)
Press this key to select one of 5 letter styles available.
q
t
r
o
!0
!1
!2
!4
!5
Function Keys
w
y
e
!6
!7
!8
!1 Clear key (refer to pages 26, 30, 36, 95, 99)
Press this key to delete the last memorized pattern.
Press and hold this key until the buzzer sounds to delete
the whole pattern combination.
!2 Auto thread cutter key (refer to page 85)
Press this key before sewing, if you wish to cut the
threads automatically after finishing sewing with a locking
stitch.
When programming a pattern combination, press this
key after the last programmed pattern to cut the threads
automatically after finishing sewing.
The LED signal on the thread cutter button will turn on
when the auto thread cutter key is pressed.
!3 Direct pattern selection keys (refer to page 25)
Press one of 6 keys to select a stitch pattern directly.
!4 Set key (refer to page 27)
Press this key to open the machine setting window for
customizing the machine settings.
!5 Favorite setting key (refer to page 36)
Press this key to view information on the selected pattern.
!6 Memory recall key (refer to page 98-99)
Press this key to memorize the selected pattern or recall
the memorized pattern.
!7 Help key (refer to page 26)
Press this key to view information on the selected pattern.
!8 Lockout key (refer to page 13)
Press this key to lockout the machine when threading the
machine, replacing the accessories etc.
To reduce the risk of injury, all the buttons and keys are
deactivated.
To unlock the machine, press this key again.
9
u
i
!3
Advertisement
Table of Contents
