Adjusting The Projector Level - InFocus SP8600 series User Manual

Adjusting the Projector Level

Take note of the following when setting up the projector:
•
The projector table or stand should be level and sturdy.
•
Position the projector so that it is perpendicular to the screen.
•
Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.
•
Ensure the cables are in a safe location. You could trip over them.
1.
To raise the level of the projector, twist
the adjusters clockwise.
2.
To lower the level of the projector, lift
the projector and twist the adjusters
counter clockwise.
– 17 –
SP8604 User's Manual