5.
Press source key to toggle the source that you want to display on the screen (computer, notebook,
video player, etc). The projector will detect the source automatically and will display on the screen.
If not, push menu button and go to "SETUP>>Basic".
Note:
If you connected multiple sources at the same time, press the "Source" key on the remote
control to switch between inputs.
•
PC: Analog RGB
•
HDMI 1/2/3: High Definition Multimedia Interface
•
COMPONENT: DVD input YCbCr / YPbPr, or HDTV input YPbPr
•
COMPOSITE: Traditional composite video
•
S-VIDEO: Super video (Y/C separated)
Note:
Turn on the projector first and then select the signal sources. First time to turn on the projector:
Remember to select the type of lens you have installed.
/
SCART
– 15 –
SP8604 User's Manual