Shutting Down The Projector - InFocus SP8600 series User Manual

SP8604 User's Manual

Shutting down the Projector

1.
Press the "
control or "
side of the projector two times with one
second interval in between to turn off
the projector. First push of button will
display the following message on the
screen.
Press the button again to confirm the
shut down. If the button is not pressed,
the message will disappear in 5 seconds.
2.
The cooling fans continue to operate for about 60 seconds for cooling cycle and the PWR LED will turn red.
When the light is solid red, the projector has entered standby mode.
If you wish to turn the projector back on, you must wait until the projector has completed the cooling cycle
and has entered standby mode. Once in standby mode, simply press "
tor or "
3.
Disconnect the power cord from the electrical outlet and the projector.
4.
Do not turn on the projector immediately following a power off procedure.
" button on the remote
" button on the rear
" on the remote control to restart the projector.
– 16 –
" button on the rear of the projec-