Configuring Ip Multicast Routing - Cisco Catalyst 3120 Software Manual

Catalyst blade switch for hp

Hide thumbs Also See for Catalyst 3120:

Table of Contents

Configuring IP Multicast Routing

This chapter describes how to configure IP multicast routing on the switch. IP multicasting is a more

efficient way to use network resources, especially for bandwidth-intensive services such as audio and

video. IP multicast routing enables a host (source) to send packets to a group of hosts (receivers)

anywhere within the IP network by using a special form of IP address called the IP multicast group

address. The sending host inserts the multicast group address into the IP destination address field of the

packet, and IP multicast routers and multilayer switches forward incoming IP multicast packets out all

interfaces that lead to members of the multicast group. Any host, regardless of whether it is a member

of a group, can send to a group. However, only the members of a group receive the message.

To use this feature, the switch or stack master must be running the IP services feature set. To use the PIM

stub routing feature, the switch or stack master can be running the IP base image.

Unless otherwise noted, the term switch refers to a standalone switch and to a switch stack.

For complete syntax and usage information for the commands used in this chapter, see the Cisco IOS IP

Command Reference, Volume 3 of 3: Multicast, Release 12.2.

This chapter consists of these sections:

Understanding Cisco's Implementation of IP Multicast Routing, page 44-2

Multicast Routing and Switch Stacks, page 44-9

Configuring IP Multicast Routing, page 44-10

Configuring Advanced PIM Features, page 44-27

Configuring Optional IGMP Features, page 44-30

Configuring Optional Multicast Routing Features, page 44-36

Configuring Basic DVMRP Interoperability Features, page 44-40

Configuring Advanced DVMRP Interoperability Features, page 44-45

Monitoring and Maintaining IP Multicast Routing, page 44-53

For information on configuring the Multicast Source Discovery Protocol (MSDP), see

"Configuring MSDP."

C H A P T E R

Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide

Table of Contents