Displaying Link-State Tracking Status - Cisco Catalyst 3120 Software Manual

Configuring Link-State Tracking

Displaying Link-State Tracking Status

Use the show link state group command to display the link-state group information. Enter this
command without keywords to display information about all link-state groups. Enter the group number
to display information specific to the group. Enter the detail keyword to display detailed information
about the group.
This is an example of output from the show link state group 1 command:
Switch> show link state group 1
Link State Group: 1
This is an example of output from the show link state group detail command:
Switch> show link state group detail
(Up):Interface up
Link State Group: 1
Upstream Interfaces
Downstream Interfaces : Gi0/3(Up) Gi0/4(Up)
(Up):Interface up
For detailed information about the fields in the display, see the command reference for this release.
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
37-26
Status: Enabled, Down
(Dwn):Interface Down
Status: Enabled, Up
: Po1(Up)
(Dwn):Interface Down
Chapter 37 Configuring EtherChannels and Link-State Tracking
(Dis):Interface disabled
(Dis):Interface disabled
OL-12247-01