Cisco Catalyst 3120 Software Manual page 106

Configuring Cisco IOS Agents
Command
Step 7 discover {controller controller-type | dlci
[subinterface subinterface-number] | interface
[interface-type] | line line-type}
Step 8
template name [ ... name]
Step 9
Step 10
exit
Step 11
hostname name
Step 12 ip route network-number
Cisco Catalyst Blade Switch 3120 for HP Software Configuration Guide
4-10
Chapter 4
Purpose
Specify the interface parameters in the CNS connect
profile.
• For controller controller-type, enter the controller
type.
• For dlci, enter the active data-link connection
identifiers (DLCIs).
(Optional) For subinterface subinterface-number,
specify the point-to-point subinterface number that is
used to search for active DLCIs.
For interface [interface-type], enter the type of
•
interface.
For line line-type, enter the line type.
•
Specify the list of CNS connect templates in the CNS
connect profile to be applied to the switch configuration.
You can specify more than one template.
Repeat Steps 7 to 8 to specify more interface parameters
and CNS connect templates in the CNS connect profile.
Return to global configuration mode.
Enter the hostname for the switch.
(Optional) Establish a static route to the Configuration
Engine whose IP address is network-number.
Configuring Cisco IOS CNS Agents
OL-12247-01