HP Data Protector A.06.11 Integration Manual page 87

GUI/CLI option
Application database/
-newinstance
Restore memory state if
available/
-memory
Register virtual machines if
needed/
-register
Consolidate snapshots to single
file/
-consolidate
Integration guide for VMware Virtual Infrastructure, Sybase, Network Node Manager,
Description
Specifies the datacenter that the virtual machines are
restored to. By default, the virtual machines are restored
to the original datacenter. Change the default only in the
case of a disaster recovery when the new datacenter
does not have the same name as the original one.
You can also change the default if you want to restore
the virtual machines outside of a datacenter, in which
case you should select None (restore files to client).
Consequently, the virtual machines are restored to the
client specified in Restore client, to the directory specified
in the client omnirc variable OB2_VMWARE_PATH.
This option is not applicable if you restore from a VCBfile
backup.
Select this option to restore the virtual machine memory
file as well if it was backed up.
This option is not available if None (restore files to client)
is selected in Application database or if you restore from
a VCBfile backup.
Default: OFF
Select this option to register restored virtual machines.
Clear this option if you restore from a Snapshot backup
in which individual virtual machine disks were backed
up. Otherwise, the restore fails.
If this option is not selected, you need to manually recover
the restored virtual machines as described in
virtual machines manually" on page 92.
This option is not available if None (restore files to client)
is selected in Application database or if you restore from
a VCBfile backup.
Default: OFF
This option is applicable only if Register virtual machines
if needed is selected. Select this option to commit all
existing snapshots (including non-Data Protector ones) to
the virtual machine base when the restore completes.
This option is not available if None (restore files to client)
is selected in Application database or if you restore from
a VCBfile backup.
Default: OFF
and Network Data Management Protocol Server
"Recovering
87