Integration Guide For Vmware Virtual Infrastructure, Sybase, Network Node Manager - HP Data Protector A.06.11 Integration Manual

Using the Data Protector syb_tool command
The Data Protector syb_tool command returns the exact Sybase load command
needed for restore.
The syntax of the syb_tool command is:
syb_tool database Sybase_instance
-date YYYY/MM/DD.hh:mm:ss
[ -new_db new_database
[ -new_server new_Sybase_instance ]
[ -file file
[ -media
Parameter description
database
Sybase_instance
date
new_database
new_Sybase_instance
file
-media
To define the time interval between the closure of transaction logs and the start of a
backup session, set the global variable OB2SybaseTransLogDelay. The default
value is 20 seconds.
Example 1
To get the load command that restores database1 of the Sybase instance audi
from the first backup performed after 12.00 noon on June 1, 1999, and to get the
necessary media, run:

Integration guide for VMware Virtual Infrastructure, Sybase, Network Node Manager,

]
]
]
and Network Data Management Protocol Server
Database to be restored.
Sybase instance from which the database to
be restored was backed up.
Point in time. The first backup version created
after this point in time is restored. Use the
0-24h time format.
Target database to which to restore.
Target Sybase instance to which to restore.
Pathname of a file to which the load
command or command sequence is recorded.
Lists media needed for the restore.
133