HP Data Protector A.06.11 Integration Manual page 45

Use common
settings for
selected VM
Use default
settings
Snapshot Disabled
handling (default)
Single
Mixed
Backup proxy Backup
configuration proxy
Integration guide for VMware Virtual Infrastructure, Sybase, Network Node Manager,
Available only if a virtual machine is selected.
Select this option to apply the common virtual machine
settings for the selected virtual machine.
Default: ON
Available only if Common VM Settings is selected.
Select this option to set default values for the common
virtual machine settings.
Default: ON
This mode supports only full backups. The virtual machine
snapshot that is created during backup is removed at the
end of the session. For details, see
disabled" on page 52.
This mode supports full, incremental, and differential
backups. However, you cannot mix incremental and
differential backups within the same backup chain.
Data Protector keeps one DP snapshot for backup purposes.
For details, see "Snapshot mode:
This mode supports full, incremental, and differential
backups, in all combinations.
Data Protector keeps up to two DP snapshots for backup
purposes. For details, see
mixed" on page 58.
Select a backup proxy system to be used for the VCBfile
and VCBimage backup methods. Note that Data Protector
lists all the systems that have the VMware Integration
component installed, including those that may not be
backup proxy systems.
and Network Data Management Protocol Server
"Snapshot mode:
single" on page 54.
"Snapshot mode:
45