Integration Concept; Configuring The Integration; Prerequisites; Data Protector Nnm Integration Components - HP Data Protector A.06.11 Integration Manual

Integration concept

The basic components of the Data Protector NNM integration are the following Perl
scripts:
Table 18 Data Protector NNM integration components
NNMpre.ovpl
NNMpost.ovpl
NNMScript.exe
(Windows only)
NOTE:
Files created by the embedded database remain on the disk and are overwritten by
future backups. Remove the files manually to free the disk space.
The NNM Perl compiler is used for NNMpre.ovpl and NNMpost.ovpl.
While HP Network Node Manager is responsible for read/write operations to disk,
Data Protector reads from and writes to devices and manages media.

Configuring the integration

Prerequisites

• Ensure that you have correctly installed and configured NNM.
• For supported versions, platforms, devices, and other information, see the HP
Data Protector product announcements, software notes, and references or
http://www.hp.com/support/manuals.
150 Integrating HP Network Node Manager and Data Protector
A script without arguments that:
1. Initiates a special NNM backup, instructing the NNM database
to make a direct copy of itself to a location specified in the
solid.ini file, from which Data Protector backs it up later.
2. Pauses the eight NNM processes, so that Data Protector can
actually back up the NNM data.
A script without arguments that restarts the NNM processes after the
backup completes.
A script with a pre- and post- argument that locates the NNM Perl
compiler and NNM pre.ovpl or NNMpost.ovpl, and starts the
script.