HP StorageWorks MSL5000 series User Manual page 89

Table 7: View SCSI Options (Continued)
TapeAlert Mode
Abort Move Status
Door Open Response
Initiate Wide Data
Transfer Negotiation
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Option
Specifies conditions for logging and reporting the
following Tape Alert data options. The default is
Unconditionally Generate Recovered Error.
Lets you specify the SCSI response while aborting a SCSI
command. The possible settings are Busy or Not Ready.
The default is Not Ready.
Lets you specify the SCSI response when a library door is
open. The settings are Ready or Not Ready. The default is
Not Ready.
Lets you enable the library to initiate a SCSI synchronous
and wide data transfer negotiation with the host. The
settings are Do Not Initiate or Initiate. The default is Do
Not Initiate.
Description
Logging Disabled: Inhibits the logging feature.
—
No Exceptions: The library must not report
—
information exceptions.
— Generate Unit Attention: Reports information
exceptions with a Unit Attention sense key and an
ASC/ASCQ of 5D/00.
— Conditionally Generate Recovered Error: Reports
information exceptions with a Recovered Error
sense key and an ASC/ASCQ of 5D/00, if
Recovered Error Reporting is enabled.
— Unconditionally Generate Recovered Error:
Unconditionally reports information exceptions
with a Recovered Error sense key and an
ASC/ASCQ of 5D/00.
— Generate No Sense: Reports information
exceptions with a No Sense sense key and an
ASC/ASCQ of 5D/00.
— Report on Unsolicited Request Sense: Reports
information exceptions with a No Sense sense
key and an ASC/ASCQ of 5D/00, only in
response to an unsolicited REQUEST SENSE
command.
Operation
89