Removing The System Board - HP Integrity rx2600 Operation And Maintenance Manual

Installing or Replacing Parts and Accessories
System Board
Ä
CAUTION: Some system settings are saved to the LED status panel. If you are replacing both the LED
status panel and the system board, they must be replaced one at a time to avoid loss of system settings.
First replace one component, then turn on the system and boot to the EFI prompt. After confirming that the
first component has been replaced successfully, shut down the system and replace the second
component.

Removing the System Board

❏
❏
❏
❏
❏
Removing the Power Connector Plate
2–46
1
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
(1)
2