HP Integrity rx2600 Operation And Maintenance Manual page 12

Product Overview
Feature
Accessory card slots
Management Processor
card
(standard on Integrity
rx2600 server, optional
on zx6000 workstation)
Rear connectors
(labeled)
LAN connectors
1–4
Description
zx6000 workstation:
• One AGP Pro 4
• Three 64-bit 133 MHz Peripheral Component Interconnect
(PCI-X 1.0) slots, supporting all bridges and multifunction PCI-X
devices; all three PCI-X slots comply with PCI-X 1.0 specification
Integrity rx2600 server:
• Four 64-bit 133 MHz Peripheral Component Interconnect (PCI-X 1.0)
slots
25-pin serial connector (with console/remote/USP extensions; requires
breakout cable)
10/100 BT Management LAN
15-pin VGA connector
• The graphics display port functionality on the HP Management
Processor Card is not supported on zx6000 workstations with an
AGP graphics card installed; all other HP Management Processor
Card functionality is supported
Four USB connectors:
• High speed 480 Mb/sec. capable
• Full speed 12 Mb/sec. and low speed 1.5 Mb/sec.
• HP-UX supports HP USB keyboard and mouse
• Linux supports all 1.1 USB devices
• Windows supports USB keyboard and mouse,
as well as other USB devices with driver support
Two 9-pin serial ports:
• UART 16550 buffered
• RS-232-C
External 68-pin LVDS/SE SCSI connector (see SCSI controller above)
• 10/100 BT Management LAN
• 10/100/1000 BT Gigabit LAN
• 10/100 BT MP Card LAN (on systems with MP card)
HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide
×
32-bit slot supporting 1.5V AGP cards