Cpcl Emulation - Printek MtP Series Programmer's Manual

Mtp series
Table of Contents

Advertisement

CPCL Emulation supports a subset of the Comtec CPCL command set and allows the Printek MtP Series
printers to respond to commands designed to control a CPCL compatible printer. The commands that are
supported are listed below.
Note: This emulation is only available in units with firmware version 2.0 or later.
CPCL Commands
Terminate and Print File
Form Feed
Set Form Feed
Place Text on Label
Place Text on Label, Rotated 90° CCW
Place Text on Label, Rotated 180°
Place Text on Label, Rotated 270° CCW
Place Mult. Same Size Text Lines on Label
Set Font Magnification
Print Bar Code
Print Vertical Bar Code
Print PDF-417 Bar Code
Print Human Readable Text Under Bar Code
Place a Rectangular Box on Label
Place a Line on Label
Place Expanded Graphics on Label
Place Vertical Expanded Graphics on Label
Place Compressed Graphics on Label
Place Vertical Compressed Graphics on Label VCOMPRESSED-GRAPHICS, VCG {width} {height}
Set Print Contrast Level
Set Print Tone Level
Set Page Width
Enable Pace Mode
Disable Pace Mode
Wait n/8 Seconds
Set Maximum Print Speed
Set Paper Feed Distance Before Printing
Set Paper Feed Distance After Printing
Position Media at Tear Bar for n/8 Seconds
Sound Control Panel Bell for n/8 Seconds

CPCL Emulation

PRINT
FORM {max feed} {skip length}
SETFF
TEXT, T {font} {size} {x} {y} {data}
TEXT90, VTEXT, T90, VT {font} {size} {x} {y} {data}
TEXT180, T180 {font} {size} {x} {y} {data}
TEXT270, T270 {font} {size} {x} {y} {data}
MULTILINE, ML {height}{text} {font} {size}
{x} {y} {data}
ENDMULTILINE, ENDML
SETMAG {w} {h}
BARCODE, B {type*} {width} {ratio} {height}
{x} {y} {data}
VBARCODE, VB {type*} {width} {ratio} {height}
{x} {y} {data}
BARCODE PDF-417 {x} {y} [XD n] [YD n [C n] [S n] {data}
ENDPDF
BARCODE-TEXT, BT {font number} {font size} {offset}
BOX {x0} {y0{ {x1} {y1} {width}
LINE, L {x0} {y0{ {x1} {y1} {width}
EXPANDED-GRAPHICS, EG {width} {height}
{x} {y} {data}
VEXPANDED-GRAPHICS, VEG {width} {height}
{x} {y} {data}
COMPRESSED-GRAPHICS, CG {width} {height}
{x} {y} {data}
{x} {y} {data}
CONTRAST {level}
TONE {level}
PAGE-WIDTH,PW {width}
PACE
NO-PACE
WAIT {delay-time}
SPEED {speed level}
PREFEED {length}
POSTFEED {length}
PRESENT-AT {length} {delay}
BEEP {beep length}
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mtp300Mtp300 lpMtp400Mtp400 lpMtp400 sl

Table of Contents