Connection To Rs-232C Device - Fujitsu IP-900E Hardware User's Manual

Chapter 2 Installation and Connection
2.5
2.5
The [RS-232C] connector of IP-900E/IP-900D series is the RS-232C communication terminal. The
terminal of IP-900E/IP-900D series is the D-sub 9 pins (male) and the specification is DTE. Use a
cross connection or straight cable corresponding to the connected device. See Section 4.2, "Cable and
Connector Details."
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
Figure Connection to RS-232C input/output device
IP-900E/IP-900D series
Connection to RS-232C
Device
100-240V
FG
100M
PWR ALM OPT
LINK
RDY IN
/ACT
DWN
MNT
Data communication
device
30
L R
D-sub9pin（female）