2.4
2.4
To connect IP-900E/IP-900D series to a LAN device, connect the LAN device to the LAN
communication port of IP-900E/IP-900D series using a LAN cable (UTP cable).
communication port specification of IP-900E/IP-900D series is 10BASE-T/100BASE-TX.
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
Please do not provision the IP address below.
・ IP address commonly unused(0.0.0.0,255.255.255.255,etc...)
・ Loop back address (127.xxx.xxx.xxx)
・ Class D and Class E addresses
・ IP address already used
For more information, see IP-900E/IP-900D series Software User's Guide.
Connection to Network
100-240V
PWR ALM
FG
Hub, Router, PC, etc.
Figure Connection to a network
100M
OPT
LINK
RDY
IN
/ACT
DWN
MNT
CAUTION
29
Chapter 2 Installation and Connection
L
R
IP-900E/IP-900D series
The LAN