Connection To Rs-232C/Rs-422 Device; Connection To Rs-232C Device - Fujitsu IP-9610 Hardware User's Manual

2.5
2.5
The [SERIAL] connector of IP-9610 is the RS-232C or RS-422 communication terminal (switchable).
The terminal of IP-9610 is the D-sub 9 pins (male) . The specification of RS-232C operating mode is
DTE. Use a cross connection or straight cable corresponding to the connected device. See Section 4.2,
"Cable and Connector Details."
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
Figure Connection to RS-232C or RS-422 input/output device
Connection to RS-232C/RS-422
Device
Chapter 2 Installation and Connection
25
IP-9610