Table of Contents
Advertisement
Administrator's Guide SoundPoint IP / SoundStation IP
Attribute
dir.local.nonVolatile.maxSize.8meg
dir.search.field
Presence <pres/>
Attribute
pres.reg
Fonts <font/>
Note
A - 60
Permitted
Values
1 to 100
0, 1
The parameter pres.reg is the line number used to send SUBSCRIBE. If this
parameter is missing, the phone will use the primary line to send SUBSCRIBE.
Permitted
Values
positive
integer
This section does not apply to the SoundPoint IP 301 phones.
These settings control the phone's ability to dynamically load an external font
file during boot up. Loaded fonts can either overwrite pre-existing fonts
embedded within the software (not recommended) or can extend the phone's
font support for Unicode ranges not already embedded. The font file must be
a Microsoft .fnt or .fon file format. (.fon file format is a collection of .fnt fonts
grouped together within a single file.) The font file name must follow a specific
pattern as described:
•
Font filename:
<fontName>_<fontHeightInPixels>_<fontRange>.<fontExtension>
Default
Interpretation
100
Attribute applies only to platforms
with 8 Mbytes of flash memory.
This is the maximum size of
non-volatile storage that the
directory will be permitted to
consume.
Null
Specifies how to search the contact
directory. If set to 1, search by
contact's first name. If set to 0,
search by contact's last name.
Default
Interpretation
1
Specifies the line/registration
number used to send SUBSCRIBE
for presence. Must be a valid
line/registration number. If the
number is not a valid
line/registration number, it is
ignored.
Advertisement
Table of Contents
