Web Server <Httpd - Polycom SIP 2.2.2 Manual

Administrator's Guide SoundPoint IP / SoundStation IP
Attribute
tcpIpApp.port.rtp.filterByIp
tcpIpApp.port.rtp.filterByPort
tcpIpApp.port.rtp.forceSend
tcpIpApp.port.rtp.mediaPortRangeStart
Web Server <httpd/>
A - 54
Port <port/>
This attribute includes:
• RTP <rtp/>
RTP <rtp/>
This configuration attribute is defined as follows:
Permitted
Values
0, 1
0, 1
Null,
1024-65534
Null, even
integer from
1024-65534
The phone contains a local web server for user and administrator features.
This can be disabled for applications where it is not needed or where it poses
a security threat. The web server supports both basic and digest
authentication. The authentication user name and password are not
configurable for this release.
Default Interpretation
1 If set to 1, reject RTP packets
arriving from (sent from) a
non-negotiated (through SDP) IP
address.
0 If set to 1, reject RTP packets
arriving from (sent from) a
non-negotiated (through SDP)
port.
Null When non-Null, send all RTP
packets to, and expect all RTP
packets to arrive on, the
specified port.
Note: both
tcpIpApp.port.rtp.filterByIp and
tcpIpApp.port.rtp.filterByPort
must be enabled for this to work.
Null If set to Null, the value 2222 will
be used for the first allocated
RTP port, otherwise, the
specified port will be used.
Subsequent ports will be
allocated from a pool starting
with the specified port plus two
up to a value of (start-port + 46),
after which the port number will
wrap back to the starting value.