Weider Pro 205 User Manual page 4

PART IDENTIFICATION CHART
This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. The second number refers to the quantity needed for assembly.
Important: Some ports may have been pre-assembled for shipping purposes. If you cannot find a part in
the parts bags, check to see if It has been pre-aseembled.
1" Round Inner Cap (14)-3
1' Angled Round Cap (11)-1
3/4" Round Inner Cap (25)-6
M8 Washer (2)-4
M8 Nylon Locknut (7)-11
M10 Nylon Locknut (4)-3
M4 x 25mm Screw (10)-1 M6 x 16mm Screw (6)-6
M10 x 75mm Bolt (5)--3
M8 x 68mm Bolt (8)-4
M8 x 75mm Bolt (29)-1
M8 x 48mm Carriage Bolt (3)-4
4