Cable Tv Connections - Toshiba MW27H63 Owner's Manual

ble TV connections
This unit has an extended tuning range and can tune most cable channels without using a Cable TV converter box.
Some cable companies offer "premium pay channels" inwhich the signal is scrambled. Descrambting these signals for
normal viewing requires the use of a descrambler device which is generally provided by the cable company.
Antenna
jack
75 ohm
coaxial cable
_" For basic cable service not requiring a converter/descrambler
box, connect the Cable TV 75 ohm coaxial cable directly to the
Antenna jack on the back of the unit.
If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the
incoming 75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, connect
the output jack of the converter/descrambler box to the antenna jack on the unit. Follow the connections shown
below. Set the unit to the output channel of the converter/descrambler box (usually channel 3 or 4) and use the
converter/descrambler box to select channels.
®
Incoming
75 ohm Antenna
Cable TV 75 ohm cable to jack
Converter/ i the unit
descrambler -_'
®
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require
the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B Switch box (available
from the cable company or an electronics supply store). Follow the connections shown below. With the switch in
the "B" position, you can directly tune any nonscrambled channels on your unit. With the switch in the "A" position,
tune your unit to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/
descrambler box to tune scrambled channels.
_Sp Converter/
Incoming descrambler Antenna
75 ohm
Cable TV 75 ohm cable to jack
the unit
litter A/B switch | _ _
I
5Y40 01Aindb 14
÷
J
12'21 2006 11:i8:14 AM