Turning Off Tile Built-In Speakers; Sdecting Tile Audio Out Sound - Toshiba DLP 46HM84 Owner's Manual

A L
Turning off the built-in speakers
Use this feature to turn the TV speakers off when you connect an
audio system (see "Connecting an audio system" on page 16).
To turn off the built-in speakers:
1. Press MENU, then press • or • until AUDIO menu appears.
2. Press • or • to highlight SPEAKERS, and then press ENTER.
3. Press • or • to select OFE and then press ENTER.
AUDIO
STABLE SOUND
AUD I 0 OUT
@:
SELECT NTIS: SET
To turn on the built-in s )eakers:
Select ON in step 3 above.
Selecting the Audio OUT sound
This feature allows you to select the sound source (MAIN or POP)
that is output from the Audio OUT terminals (for example, see
"Connecting two VCRs" on page 14).
This is useful when ampli_ing or recording the POP sound with
external equipment while listening to the sound of the main picture
through the built-in speakers.
To select the Audio OUT sound:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight AUDIO OUT, and then press
ENTER.
3. Press • or • to select MAIN or POE and then press ENTER.
Note:
Make sure the volume control of your aud/b
amplifier/s set to a moderate listening level
O© ®
©® ®
@ ® @
MENU
IV< I,.
ENTER
Note:
When the POP window is closed, the sound of
the main program is output through the
AUD!O 0 UT terminals, even if POP is
selected in the AUDIO OUTmenu.
_STABLE SO U N'_) UDI°
SPEAKERS
{{€,u_ B
@: SELECT EN_E_I: SET
• MAIN : Outputs the sound of the main (left window) program.
• POP : Outputs the sound of the POP (right window) program.
#01 E49 5 54
- 5J46,52,62HM84 54
/
Black
(E) 46HM84, 52HM84, 62HM84
5/31/04, 12:20 PM
F