Using Tile Pop Double-Window Feature - Toshiba DLP 46HM84 Owner's Manual

A L
Using the POP double-window feature
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display aTV broadcast in the POP window:
1. Press SPLIT to display the POP window.
Main window_
(480i only)
POP window
2. Select POP channels in the following two ways:
• To change to a specific channel, press POP DIRECT CH.
While "POP" is on the screen, press the Channel Number
buttons (0-9 and 100).
• To change to the next programmed channel, press POP CH
VA.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
[)locked (see "Using the V-CHIP menu" on page 37).
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see "Connecting your
TV" on page 8).
2. Select the TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
ColorStream HD2 or HDMI). The current source will display in
purple.
5. You can play a tape as the POP picture, or select a channel for the
POP window using the VCR_ channel keys.
ililililililililililililililililililililililililililililililililililililililililililililililililililililililililililililililililililililililili_;_;_
POP SOURCE S ECT I ON
o! TVDEC
21VIDEC 21
3 : VIDE( 3
4:Colo_S earn HD1
5:Colo_S earn HD2
6 : HDM I
O-6:TO SE ECT
While the above menu is on the screen, you can select the desired
signal input source by pressing the corresponding number button
(0-6).
To close the POP window:
Press SPLIT again or EXIT.
#01E26-37 46,52,62HM84 33
Black
(E) 46HM84, 52HM84, 62HM84
Note:
• The SPLITbuttons on the remote control
operate the TV's POP features.
• YoucandispIayonIy480iformatpfogram
in the main window Only the audio signal is
outpu£
• You cannot display the ANT-2 s/gnal source
in the POP windo_z
• You can choose to output the sound of
either the main or POP program through
the AUDIO OUT jacks (see "Selecting the
Audio OUTsound" on page 54).
• You can choose to hear either the main or
POP audio through the TVspeakefs. (See
"Switching the speaker audio (main or
POP)" on page 34.)
Channel
Number
5/31/04,12:20 PM
33
F