Attaching The Grass Deflecto - Toro 51938 Operator's Manual

Attaching the Grass Deflector
Attaching the grass deflector differs depending on the
type of trimmer: curved shaft or straight shaft.,
_WARNING: i
The line cutting blade on the grass deflector is
Ish,_p_ Avoid contact with the blade. Failure to
Rote: To protect the operator, always be sure to attach
the grass deflector..
To Attach the Curved Shaft Grass Deflector
Model Nos. 51934 & 51940
See Figure 5
Follow these steps to attach the curved shaft grass deflec-
tOE
,
Press the grass deflector onto the bottom of the
curved shaft as shown.
2. Lift die grass barrier up slightly
3. Insert the hex head cap screw through the grass
deflector, bracket, and grass barrier
4. Place the flat washer and lock washer on the hex head
5_
cap screw,
Place the wing nut or hex nut on the hex head cap
screw and turn clodcwise to secure,,
3. Align the screw hole in the mounting bracket with
the screw hole in the grass deflector.,
4. Insert die slotted hex head screw through the mount-
ing bracket and into file grass deflector.
5. Tighte,a the screw securely:.
Tab
Straight Shaft
Grass Deflector
Slot : _'
Figure 6
Wing
Curved Shaft _ Nut Hex
Grass Deflector ./- Nut
Cap Screw
Figure 5
To Attach the Straight Shaft Grass Deflector
Model Nos. 51932 & 51938 and Model Nos, 51934 &
5'I940
See F_we 6
Follow these steps to attach the straight shaft grass deflec-
tOL
1,
2_
Remove die slotted hex head screw from the grass
deflector,
Insert the tab on the mounting bracket in the slot on
the grass deflector
Assembly 13