Table of Contents
Advertisement
Form No. 3329-634
Trimmer/Brushcutter
Model No. 51930—230000001 & Up
Model No. 51932—230000001 & Up
Model No. 51934—230000001 & Up
Model No. 51930A—230000001 & Up
Model No. 51932A—230000001 & Up
Model No. 51934A—230000001 & Up
Model No. 51936—230000001 & Up
Model No. 51938—230000001 & Up
Model No. 51940—230000001 & Up
STOP
If you have questions concerning your
trimmer or brushcutter, please call us
at 1-866-574-9242 (US) or
1-866-574-9243 (Canadá).
Operator's Manual
WARNING:
To reduce the risk of injury, the user must read and understand the operator's manual. Save this manual.
English (EN), French (F), and Spanish (ES)
Advertisement
Table of Contents
Related Manuals for Toro 51930
Summary of Contents for Toro 51930
- Page 1 Form No. 3329-634 Trimmer/Brushcutter Model No. 51930—230000001 & Up Model No. 51932—230000001 & Up Model No. 51934—230000001 & Up Model No. 51930A—230000001 & Up Model No. 51932A—230000001 & Up Model No. 51934A—230000001 & Up Model No. 51936—230000001 & Up Model No. 51938—230000001 & Up Model No.
- Page 2 WARNING: The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. © The Toro Company-2003 Printed in USA 8111 Lyndale Ave., Bloomington, MN 55420, USA All rights reserved...
-
Page 3: Table Of Contents
Table of Contents Introduction ................................4 Safety Rules ................................. 5 Symbols..................................6 Product Labels ................................7 Specifications................................8 Applications................................. 8 Features ..................................9 Unpacking................................. 11 Assembly ................................... 12 Connecting the Attachment to the Upper Shaft ....................12 Removing the Attachment from the Upper Shaft ....................12 Attaching the Front Handle .......................... -
Page 4: Introduction
The Toro warning system in this manual identifies potential hazards and has special safety messages that help you and others avoid personal injury, even death. DANGER, WARNING, and CAUTION are signal words that identify the level of hazard. -
Page 5: Safety Rules
Safety Rules WARNING: Read and understand all instructions. Failure to follow all instructions may result in serious personal injury as well as damage to the product. This product has been designed and manufactured to of children, bystanders, and pets. At a minimum, meet or exceed the requirements of the current version of keep all children, bystanders, and pets outside a 50 ANSI B175.3, safety requirements for gasoline-powered... -
Page 6: Symbols
No Blade Do not install any type of blade on Model No. 51930 or 51936 and Model No. 51932 or 51938. Use only flexible, non-metallic line recommended by the manufacturer. -
Page 7: Product Labels
Product Labels Product labels and instructions are easily visible to the operator and are located near any area of potential danger. Replace damaged or lost labels. Part No. 983647-001 Part No. 983648-001 To Start set SWITCH to ON Cold Engine Push bulb x 8 Warm Engine Choke Position A... -
Page 8: Specifications
Specification Engine 25.4 cc Full Crank Durability 300 hours Cutting Width Model Nos. 51930 & 51936 17 in. Model Nos. 51932 & 51938 18 in. Model Nos. 51934 & 51940 8 in. for brushcutter, 18 in. for trimmer Line Size .095 in. -
Page 9: Features
Curved Shaft Trimmer Feature (Model Nos. 51930 & 51936) Grass Barrier The grass barrier keeps grass from getting wrapped around the drive shaft. - Page 10 Curved Shaft Trimmer (Model Nos. 51930 & 51936) Grass Front Handle Barrier Curved Shaft Grass Deflector Engine Trigger Handle Straight Shaft Trimmer (Model Nos. 51932 & 51938) Dual Line Front Handle Engine Straight Shaft Grass Deflector Trigger Handle Blade Brushcutter (Model Nos.
-
Page 11: Unpacking
Handle (1) ■ Do not discard the packing material until you have Curved shaft grass deflector (1) (Model Nos. 51930 & carefully inspected and satisfactorily operated the 51936) product. Straight shaft grass deflector (1) (Model Nos. 51932 &... -
Page 12: Assembly
Assembly Connecting the Attachment to the Upper Place the handle along the upper shaft to a position that allows for comfortable operation. Shaft See Figure 2. Place the handle support on the bottom of the tube on the opposite side of the front handle. Follow these steps to connect the attachment to the upper shaft. -
Page 13: Attaching The Grass Deflector
Attaching the Grass Deflector Align the screw hole in the mounting bracket with the screw hole in the grass deflector. Attaching the grass deflector differs depending on the type of trimmer: curved shaft or straight shaft. Insert the slotted hex head screw through the mount- ing bracket and into the grass deflector. -
Page 14: Converting From Brushcutter To Trimmer
Converting from Brushcutter to Trimmer Model Nos. 51934 & 51940 To convert from the brushcutter to the trimmer, remove the blade, remove the brushcutter guard, attach the grass Head deflector, and install the trimmer head assembly. Locking Tool To Remove the Blade and Brushcutter Guard See Figure 7 and Figure 8. -
Page 15: Converting From Trimmer To Brushcutter
Converting from Trimmer to Brushcutter Install the blade nut by turning it counterclockwise (left-handed threads). Model Nos. 51934 & 51940 To convert from the trimmer to the brushcutter, remove Tighten the blade nut and torque to 120 in.lb. mini- the trimmer head assembly, remove the grass deflector, mum (finger tight plus 1/2 turn). -
Page 16: Operation
Operation Mixing the Fuel Filling the Tank DANGER: WARNING: Gasoline is extremely flammable and explosive. A Always stop the engine before filling the tank. fire or explosion from gasoline will burn you and Never add fuel to a machine with a running or hot others. -
Page 17: Starting The Product
WARNING: The product may throw objects during operation, causing injury to the operator or to bystanders. Always wear suitable eye protection, long heavy pants, and boots while operating the product. Starting the Product See Figure 14a, Figure 14b, and Figure 15. Set Choke to A Set Choke to B Starting the product differs depending on whether the... -
Page 18: Operating The Trimmer
Operating the trimmer differs, depending on whether you are using the curved shaft trimmer or the straight shaft trimmer. To Operate the Curved Shaft Trimmer (Model Nos. 51930 & 51936) See Figure 16a. Follow these steps to operate the curved shaft trimmer. Start the trimmer. -
Page 19: Operating The Brushcutter
Operating the Brushcutter (Model Nos. 51934 & 51940) See Figure 17. Follow these steps to operate the brushcutter. Start the brushcutter. Hold the brushcutter at waist level with your right hand (arm extended) on the trigger handle and your left hand on the front handle. Place the product on the right side of your body with the engine behind and away from your body. -
Page 20: Maintenance
WARNING: When replacing parts other than engine or WARNING: emissions parts, Use only Toro replacement parts. Use of line other than the proper monofilament Use of any other parts may create a hazard or cause cutting line could cause personal injury. -
Page 21: Replacing The Spool
Threaded Area Figure 18 Retaining Replacing the Spool See Figure 19. Note: For best performance, use only Toro spools (Part Eyelet No. 88046). The spool may wear during normal use of Slotted the line advance feature and may require occasional replacement. -
Page 22: Checking The Fuel Cap
Checking the Fuel Cap WARNING: Filter A leaking fuel cap is a fire hazard and must be replaced immediately. The fuel cap contains a non-serviceable filter and check valve. A clogged fuel filter causes poor engine perfor- mance. If performance improves when the fuel cap is loosened, the check valve may be faulty or the filter may be clogged. -
Page 23: Replacing The Spark Plug
See Figure 22. Storing the product differs depending on the amount of time it will be in storage. Model Nos. 51930, 51932, & 51934 use a NGK BPMR7A or Champion RCJ-6Y spark plug. Note: If the product includes another attachment, place the storage cap on the end of the attachment shaft and Model Nos. -
Page 24: Troubleshooting
Troubleshooting Problem Possible Cause Solution Engine will not start 1. Switch set to the O (OFF) 1. Set switch to the I (ON) position. position. 2. Remove the spark plug. Reattach the spark 2. No spark plug cap and lay the spark plug on the metal cylinder. - Page 25 Notes Notes...
-
Page 26: Warranty
ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state. This product is manufactured under license from The Toro Company by OWT Industries, Inc. Warranty... -
Page 27: Your Warranty Rights And Obligations
FEDERAL AND CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS OWT Industries, Inc. specifically warrants the emissions control system of this Gas Trimmer Product in accordance with the Cali- fornia and Federal legal requirements described below: OWT Industries, Inc. warrants to the original retail purchasers and subsequent purchasers that the nonroad engine included with this product has been designed, built and equipped, at the time of sale, to comply with applicable EPA regulations, and that the engine is free from defects in material and workmanship that would cause it to fail to conform with the applicable regulations for its warranty period. - Page 28 Customer Service Information If your product requires service or maintenance, contact your nearest authorized ser- vice dealer. To locate your nearest authorized service dealer for this product, contact us toll free at 1-866-574-9242 (US) or 1-866-574-9243 (Canada). OWT Industries, Inc. P.O.