Assembly
1
Butterfly Spoke
• Locate the three butterfly spokes.
• Insert and "snap" the tabs on the ends of the butterfly spokes into the
slots in the hub, as shown.
2
#4 x
3
/
" Washer
8
Head Screw
Shown Actual Size
• Locate the three soft toy spokes.
• Place the end of the spoke with the larger hole onto the matching hole on
the hub, as shown.
• Insert a #4 x
3
/
" screw through the spoke and into the hub. Tighten the
8
screw with a Phillips screwdriver. Do not over-tighten.
• Repeat this procedure to attach the other two soft toy spokes.
Slot
Tab
Hub
Hub
7
Soft Toy Spoke