Electronic Oven Control; Display; Oven Indicator Lights; Start/Enter - Roper FGP314TQ0 Use & Care Manual

Cookware withnonstick surfaces should notbeused under t he
broiler.
Use thefollowing c hart a saguide forcookware material
characteristics.
COOKWARE CHARACTERISTICS
Aluminum • Heats quickly and evenly.
• Suitable for all types of cooking.
• Medium or heavy thickness is best for
most cooking tasks.
Cast iron • Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
Ceramic or • Follow manufacturer's instructions.
Ceramic glass • Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
Copper • Heats very quickly and evenly.
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
Porcelain • See stainless steel or cast iron.
enamel-on-
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
When power is first supplied to the appliance, a flashing time will
appear on the display. Press CLOCK and use the "up" and
"down" arrows to set the correct time. Press START/ENTER.
If flashing time appears at any other time, a power failure has
occurred. Press any key and reset the Clock if needed.
When the oven is in use, the display shows preheat time and the
temperature and oven setting.
When the oven is not in use, the display shows the time of day.
The indicator lights are located along all 4 sides of the display.
The indicator lights light up or flash when the oven is in one of the
following modes: Bake, Broil, Clean (on some models), On,
Start?, Controls Locked, Door Locked (on some models), Delay,
Timer, Temp, Cook Time, or Start Time.
The START/ENTER pad begins any oven function except the
Timer. If a pad is not pressed within 5 seconds after pressing a
function pad, the "Start?" indicator light will flash as a reminder,
"?" will appear on the display.
If not pressed within 4 to 5 minutes (depending on your model)
after pressing a function pad, the oven display will return to the
time of day mode and the programmed function will be canceled.
The OFF/CANCEL pad stops any function except the Clock,
Timer and Control Lock.
The cooling fan may continue to operate after an oven function
has been canceled, depending on oven temperature.
ELECTRONIC OVEN CONTROL
Bake B_il
n a
Controls
Locked
B C D E
CI OOK T MER
S1-ART OFF
A. Oven display
B. Clock
C. Timer/Cancel
D. Start/Enter (Control Lock)
E. Off/Cancel
F Temperature/Time
G. Custom Broil
H. Bake
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1. Press CLOCK.
2. Press the "up" or "down" arrow pads to set the time of day.
3. Press CLOCK or START/ENTER.
The Timer can be set in hours or minutes up to 12 hours and
59 minutes, and counts down the set time either in hours and
minutes, or in minutes and seconds. The Timer does not start or
stop the oven.
To Set:
1. Press TIMER.
The Timer indicator light will light up.
2. Press the "up" or "down" arrow pads to set the length of time
to cook.
3. Press START/ENTER.
When the Timer has finished counting down, four 1-second
tones will sound.
To display the time of day at any time during timed cooking,
touch CLOCK once.
4. Press TIMER twice at any time during Timer operation to
cancel the Timer.
The time can be reset during the countdown by repeating the
above steps.