Framing And Clearances; Selecting Appliance Location - Heat & Glo 6000CMOD-IPI Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
NOTE: THE REAR STANDOFF MAY NEED
TO BE REMOVED WHEN VENTING AT 45º
F
1/2 IN.
A
6000
8000
Figure 5.1 Appliance Locations
20
A
B
C
TOP VENT
ONE 90º ELBOW
A B
in. 51 42
mm 1295 1067
in. 55-7/8 49
mm 1419 1245
Heat & Glo • 6000CMOD-IPI, 8000CMOD-IPI • 2241-900 Rev. i • 4/13
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
B
ALCOVE
D
INSTALLATION
B
C D
72
See Section D.
Mantel Projections
1829
79
See Section D.
Mantel Projections
2007
E
E F
22 17-3/4
559 451
22 19-3/4
559 502