Table of Contents
Advertisement
Connecting video
On-screen display
Television/Monitor
MONITOR
568.2 Digital Surround Processor
OUT
IN
VIDEO
If your surround system includes video the 568.2 can add a text
overlay to the video signal, to provide additional information
about its operation in the form of a textual on-screen display
(OSD). In normal operation this repeats the information provided
on the 568.2 front panel display. During calibration the on-
screen display provides additional guidelines to help you
perform the calibration sequence.
Connect either the composite or S-video output from the
video source to the appropriate VIDEO IN socket on the 568.2
Digital Surround Processor.
IN
Video source
(eg 562V, 581, or DVD Player)
VIDEO OUT
Video lead
Connect the corresponding VIDEO OUT socket from the 568.2
to the television or monitor.
The on-screen display automatically locks to an NTSC, PAL, or
SECAM signal, and requires an input signal to operate. The
video circuits in the 568.2 are of broadcast quality, and passing
the video signal through the digital surround processor will not
affect its quality.
59
Advertisement
Table of Contents
