Table of Contents
Advertisement
Calibrating the settings with your system
Once you have edited the settings to suit the configuration of
your system, the next step is to store the settings to the 568.2
and use the calibration listening tests built into the 568.2 to
calibrate it for correct performance.
To save the settings
First save the settings to your PC hard disk.
Choose Save from the File menu, or click the
Save button in the toolbar:
To print a summary of settings
At this stage it is useful to print a summary of the speaker and
source settings, so that you can check that they correspond to
your system configuration.
Check that there is a printer connected to your PC.
Click the Settings icon in the left-hand panel of the Meridian
window.
Click the Print sources and output summary button.
To store the settings to the digital
surround processor
Switch on the 568.2 Digital Surround Processor, and check
that the serial cable is connected between the 568.2 and the
PC.
Click the Store button in the toolbar:
The 568.2 will display:
The following Progress dialogue box shows how the operation
is progressing:
If there is a problem click the Details>> button to see more
information about the problem.
Receiving...
103
Advertisement
Table of Contents
