Table of Contents
Advertisement
There is a hiss when starting DTS
LaserDiscs
The DTS audio stream is indistinguishable from a PCM audio
stream; the 568.2 takes 30ms to identify the encoding, during
which a hiss is heard.
With non-video DTS sources you can add a 30ms delay to
avoid this.
With video sources you can create a DTS-only source to avoid
any hiss.
The preset changes unexpectedly
with a multi-channel source
If you are using a non-Meridian source on the MHR Smart Link
input, proprietary data may cause preset switching.
Select Force this source to be six-channel for the source.
See To set the advanced source options, page 96.
Cinema preset is not available
Because the Cinema preset is a user preset based on Discrete it
is possible to delete it.
Create a new preset from Discrete and name it Cinema.
Assign it to Movie 6 for the enhanced source.
113
Advertisement
Table of Contents
