Fisher-Price DIRECT LINK PRIVACY 71592 User Manual page 7

Power Switch
Power Indicator
TRANSMITTER
• Slide the power switch on the front of the transmitter to the
ON position. The power indicator lights.
• Rotate the Power/Volume dial on the receiver to the "ON"
position. The power indicator lights.
• Check to be sure the signal indicator on the receiver lights. If
the signal indicator on the receiver does not light, you need to
reset your scrambled code. Please see Resetting Your Scrambled
Code, page 8.
• Adjust the volume to a comfortable level on the receiver.
USE
Channel
Switch
Power
Indicator
Signal
Indicator
• The variable lights display will light when sound is received by
the receiver.
• If all five bars in the variable lights display light and there is a
high level of static:
– The receiver power is ON and the transmitter power is OFF.
(Turn the transmitter power ON.)
– The receiver is out of range of the transmitter. (Move the
receiver closer to the transmitter.)
– The receiver and the transmitter are not on the same channel.
(Set the channel switches on the transmitter and receiver to
the same channel.)
– Loud sounds are transmitting.
Note: The variable lights display will not light if the battery
is weak, even though you may still hear sounds. Replace the
battery with a fresh 9V alkaline battery, or use the AC adaptor
that came with this product.
• To further enhance the privacy of your home, be sure to turn
the transmitter and receiver OFF when not in use.
7
Channel Switch
Variable Lights
Display
Power/
Volume Dial
RECEIVER