Problems And Solutions - Fisher-Price DIRECT LINK PRIVACY 71592 User Manual

IMPORTANT! If you have a problem with the Direct Link Privacy Monitor™, first check the Problems and Solutions Guide. If you
still experience a problem with the Direct Link Privacy Monitor™, please call Fisher-Price® Consumer Relations at 1-800-432-KIDS.
PROBLEM
Transmitter power
indicator does not light
Receiver power
indicator does not light
No sound

PROBLEMS AND SOLUTIONS

PROBABLE CAUSE
Transmitter not turned ON
Power is turned OFF
AC adaptor not properly connected
AC adaptor problem
Weak or dead batteries
Receiver not turned ON
Power is turned OFF
AC adaptor not properly connected
AC adaptor problem
Weak or dead battery
Channel switches not on same
setting (channel)
Signal interference due to monitors,
cordless telephones, etc.
Out of range or insufficient signal
Volume not turned up
Improper antenna position
Weak or dead batteries
AC adaptor not properly connected
SOLUTION
Turn the transmitter ON.
Make sure that any light switches that control power flow to the wall
outlet are ON.
Make sure house fuses and circuit breakers are ON.
Check AC adaptor jack-to-socket and plug-to-outlet connections.
Test the transmitter using the other AC adaptor included with this product.
If the transmitter works with the other AC adaptor, contact Fisher-Price
to replace the broken AC adaptor.
Replace the batteries in the transmitter with four, fresh "C" alkaline batteries
or use AC adaptor.
Turn the receiver ON.
Make sure that any light switches that control power flow to the wall
outlet are ON.
Make sure house fuses and circuit breakers are ON.
Check AC adaptor jack-to-socket and plug-to-outlet connections.
Test the receiver using the other AC adaptor included with this product.
If the receiver works with the other AC adaptor, contact Fisher-Price
to replace the broken AC adaptor.
Replace the battery in the receiver with a fresh 9V alkaline battery or
use the AC adaptor.
Set channel switch on transmitter and receiver to the same channel.
Change the channel setting on both the transmitter and the receiver.
Identify and eliminate the source of interference.
Test reception by moving the transmitter and/or receiver to different locations
throughout the house. Relocate the transmitter and/or receiver.
Test reception by moving the transmitter and/or receiver to different locations
throughout the house. Relocate the transmitter and/or receiver.
Adjust volume control on receiver.
Make sure the antenna on the transmitter and receiver are pointing upward.
Replace the battery in the receiver with a fresh 9V alkaline battery, and
the batteries in the transmitter with four "C" alkaline batteries, or use
the AC adaptors for a power source.
Check AC adaptor jack-to-socket and plug-to-outlet connections.
10
®
®