Fisher-Price 71580 Manual

"Ma, ma, ma.
Da, da, da..."
1
3
2
Circuit Breaker
4
5
6
2
"Did you read
about..."
PROBLEMS AND SOLUTIONS
PROBLEMS
1
Transmitter power off. Power indicator not lit.
2
You hear static or buzzing because transmitter channel switch is not on
same channel as receiver.
3
Transmitter power off. Power indicator not lit. Light switch that controls
power flow to wall outlet off.
4
Transmitter power off. Power indicator not lit. AC power cord
plug-to-outlet not connected.
5
Transmitter power off. Power indicator not lit. Power is off because
circuit breaker for baby's room off.
6
You hear static or buzzing and all
five bars lit on receiver.
2
"Wah, Wah,
Wah..."
"Wah, Wah,
"Wah, Wah,
Wah..."
Wah..."
"Did you read
about..."
PROBLEM
You hear static or buzzing because receiver is out
of range of transmitter.
Note: Range varies depending on surrounding
conditions such as noise levels, physical obstructions
and signal interference.
SOLUTIONS
1
Turn transmitter power on. Power indicator lights.
2
Make sure channel switches on both transmitter and receiver set to same channel.
3
Make sure light switch that controls power flow to wall outlet is on.
4
Check AC power cord plug-to-outlet connections.
5
Make sure house fuses and circuit breakers are on.
6
Check all five solutions above. Any one or more of these solutions should solve
the problem.
Helpful Hint: If, after checking all of these solutions, you believe that your transmitter
AC power cord or receiver AC adaptor is damaged, please call Fisher-Price
1-800-432-KIDS.
1
SOLUTION
PROBLEM
You can hear conversations or Change channel switches on both trans-
mitter and receiver to eliminate source
sounds from other homes. There is
signal interference due to other of interference.
nursery monitors on same channel
Helpful Hints:
or cordless telephones.
- Do not use more than one transmitter
and one receiver at same time in same
household.
- Always remember that you are using
public airwaves when using your moni-
tor. Conversations, even from rooms
near transmitter, may broadcast to other
nursery monitors, radios, cordless tele-
phones, or scanners outside your home.
To protect privacy of your home, always
turn transmitter off when not in use.
SOLUTION
Move receiver closer to transmitter.
Helpful Hint:
- If you cannot hear your child and all five bars do not light, your
receiver battery is weak. Replace receiver battery with a fresh,
9V alkaline battery or use AC adaptor for power source.
SOUNDS SO CLEAR
NURSERY MONITOR
Product Number: 71580
® at
•Adult assembly is required to install the battery (if used).
•For proper setup and use, please read these instructions
and keep for future reference.
•Includes one AC adaptor to power receiver (plugs into
standard household outlets –120V AC). Receiver also runs
on battery power (9V alkaline battery – not included).
•Includes one AC powered transmitter (plugs into standard
household outlets – 120V AC).
TM