Specifications; Safety Warnings And Precautions - Central Machinery 44846 Assembly And Operating Instructions Manual

iteM
Motor
Spindle Speeds
Spindle Stroke
Spindle Taper
Spindle to Base Distance
Spindle to Table Distance
Column
Base Dimensions
Overall Dimensions
Chuck
Table Slot
Table Rotation
Head Tilts
Radial Travel
Table Size
Weight
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Warning: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
read all instructions before using this tool!
Keep work area clean. Cluttered areas invite injuries.
1.
2. observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don't expose to rain. Keep work area well lighted. Do not use electrically
powered tools in the presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords.
store idle equipment. When not in use, tools must be stored in a dry location to
4.
inhibit rust. Always lock up tools and keep out of reach of children.
SKU 44846

specifications

120 VAC, 60 Hz, single phase, 1/3 HP, 1700
RPM, 3 amps
620, 110, 1720, 2340, 3100 RPM
3 inches
MT2
50-1/4 incles (maximum)
28-1/4 inches
3.12 (diameter) x 52-3/8 (H) inches
Head to Base
10-1/2 (W) x 17-3/4 (L) inches; Slot 1/2 (W)
x 5-1/2 (L) inches
64-7/8 (H) x 33 (L) x 7-1/2 (W) inches
Taper: JT-3; Size: 5/8"
5/8 (W) x 3 (L) inches
360°; Tilt: 45° (left and right)
0° -40° -90°
12 inches
11-7/8 (diameter) inches
135 lbs.
save this Manual

safety Warnings and precautions

Page 2
description
# 86PJ
E105017
Rev 10b